Welcome to my Excalibur Ultralight Building Web Site!
Received Parts Log

[Home]  [Day 1]  [Day 2]  [Day 3] [Day 4-7] [Misc Items Received]
[Links] [My Visit to Excalibur Aircraft] [Muffler/Trailer] [Fuselage]
[Nose Wheel Modification]  [Links]

Here is a diary of the various parts I have received while working on the wings and tail section:

June 20, 2000 - Engine, starter, and exhaust parts:

engine1.jpg (200609 bytes)
These 3 boxes contained the engine, starter, exhaust system and various other parts.

engine2.jpg (243319 bytes)
The small box contained the starter, solenoid, rectifier, EGT probes, and cables.

engine3.jpg (190791 bytes)
The medium sized box contained the muffler, elbow, manifold, springs, etc. 

engine4.jpg (249241 bytes)
The largest box contained the Rotax 503 DCDI engine, fuel pump, and the 2 carburetors. 

engine6.jpg (210782 bytes)
This is a side view of the Rotax 503 DCDI engine showing the fan and housing.

engine5.jpg (221993 bytes)
This is a close-up view of the carburetors, fuel pump, and misc. hardware that was included.

        

May 24, 2000 - Instrument Panel - I still have to put in the Hobb's meter and the fuel gauge:

Richard's Panel  Richard's Panel  Richard's Panel  Richard's Panel  i-panel5.jpg (305184 bytes)

Here are some panels from other Excalibur owners:

  Tom's (Wash St.) Panel  Bob's Panel Brian's Panel

May 17, 2000 - My Propeller.  Tennessee Propeller 68"x32 pitch:

Prop1.jpg (135070 bytes)  Prop2.jpg (133478 bytes)

[Top of Page]

[Home]  [Day 1]  [Day 2]  [Day 3] [Day 4-7] [Misc Items Received]
[Links] [My Visit to Excalibur Aircraft] [Muffler/Trailer] [Fuselage]
[Nose Wheel Modification]  [Links]